Oregon Scientific EW102 Bedienungsanleitung PDF herunterladen (Seite 5)

• Position the sensor close to the main unit during cold

winter months as below-freezing temperatures may

affect battery performance and signal transmission.

TIP The transmission range may vary depending on many

factors. You may need to experiment with various locations

to get the best results.

NOTE Use alkaline batteries for longer usage and consumer

grade lithium batteries in temperatures below freezing.

TEMPERATURE AND HUMIDITY

To select temperature unit:

Slide °C / °F switch.

To toggle between each sensor’s readings:

Press CHANNEL repeatedly

Press and hold CHANNEL for 2 seconds to initiate auto

toggle of channel readings.

To end, press CHANNEL.

To toggle between current, minimum and maximum

records for the past 24 hours:

Press MIN. MAX. repeatedly.

To clear the records:

Press and hold MIN. MAX.

ICE WARNING

If temperature recorded falls between -2°C to 3°C (29°F to

37°F), LED indicator will ash and will stop ashing once the

temperature is out of this range.

PLACING OF UNIT

Mounting on metallic surface:

Place onto surface.

Mounting on wall:

Use wall mount hole.

Placing on a at surface:

1. Remove battery compartment cover.

2. Remove pole from casing.

3. Replace battery compartment cover.

4. Insert pole through hole and place in desired position.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Oregon Scientific EW102 Bedienungsanleitung Seite 5