Oregon Scientific WMR968 Bedienungsanleitung PDF herunterladen

CABLE FREE

WEATHER

STATION

MODEL: WMR968

USER’S MANUAL

SECTION 1 INTRODUCTION

Congratulations on your purchasing the WMR968 Cable Free

Weather Station. An all-purpose easy-to-use system, the WMR968

lets you monitor the following weather elements:

- Air temperature

- Relative humidity

- Barometric pressure

- Wind speed and direction

- Rainfall

The WMR968 is also equipped with:

- Calendar clock with daily alarm

- Weather forecast within 32 to 48 km (20- to 30-mile) radius

- Weather alarms

- Memory for maximum and minimum readings

- Simple, touch-screen operation

- RS232 PC connection jack

backlight

STANDARD PACKAGE

The original WMR968 comes complete with the following:

- Main unit (WMR968)

- Anemometer (WGR968)

- Thermo-hygrometer (THGR968)

- Rain gauge (RGR968)

- Baro-thermo-hygrometer (BTHR968)

- 12V AC adapter

The thermo-hygrometer and rain gauge are powered by solar

transmitters STR928 while the anemometer is powered by solar

transmitter STR938.

The WMR968 can support up to seven different remote instruments.

You can also connect up to three optional thermo or thermo-hygro

sensors to the system.

Optional items include:

- Thermo-hygro sensor (THGR238)

- Thermo sensor (THR238)

Contact an authorized dealer for optional items.

SECTION 2 INSTALLATION

The WMR968 operates at 433MHz. No wire installation is required

among units.

The WMR968 has an effective range of 109 yards in an open area.

Position the units within the range and be sure the transmission

path is clear of interference and obstacles.

Note:The anemometer, thermo-hygrometer and rain gauge should

be installed outdoors and in locations that best measure the weather

elements the instruments are designed for. As for the baro-thermo-

hygrometer, it must be installed indoors. If you have any optional

thermo or thermo-hygro sensors, they can be installed outdoors or

indoors.

THE ANEMOMETER

The anemometer measures wind speed and direction.

To install it,

1. Place the wind cup over the thinnest shaft on the anemometer’s

T-bar.

2. Tighten the screw on the base of the wind cup.

928N-USE.p65 08/10/2001, 12:20 PM1

1 2 3 4 5 6 7 8 9

Inhaltsverzeichnis

Seite 1 - WEATHER

1 GBCABLE FREETM WEATHERSTATIONMODEL: WMR968USER’S MANUALSECTION 1 INTRODUCTIONCongratulations on your purchasing the WMR968 Cable FreeTMWeather Stati

Seite 2

2 GB3. Align the red markings on the wind vane’s shaft.4. With the aid of a compass, face the red marking south beforemounting the anemometer.5. Mount

Seite 3 - SECTION 3 OPERATION

3 GBTHE MAIN UNITThe main unit gives you all the readings and controls. It should beplaced indoors.The main unit is powered up by the 12V AC adapter.T

Seite 4 - Indicator

4 GB BACKLIGHTThe main unit, when connected to the AC power, is equipped withan automatic backlight. Every time you press a window on the mainunit, th

Seite 5

5 GBTo select the display unit,1. Press the indoor temperature window.2. Press [UNIT] repeatedly for the desired setting. The selected unitwill apply

Seite 6

6 GBTo clear the record,1. Press the wind speed and direction window.2. Press and hold [MEMORY].As for the wind direction, it is displayed in a digita

Seite 7

7 GBDISCONNECTED SIGNALSIf without obvious reason the display for the main unit goes blankor “” are displayed, press and hold [CHANNEL] to enforce ani

Seite 8

8 GBTHGR968 :Weight : 111.5 gDimension : 113.5 (L) x 42.5 (W) x 107.5 (H)Power : Main : solar cell (STR918)RGR968 :Weight : 276 gDimension : Ø 113.5 x

Seite 9

9 GBCUSTOMER ASSISTANCEShould you have questions about this project or require additionalassistance, please contact our 24-7-365 customer service depa